Utax CD 1018 Instruction Handbook

Troubleshooting
OPERATION GUIDE 6-3
Maintenance and Error Messages
When any of the following messages appears on the message display, perform the
procedure provided below.
Message Procedure Reference
Add paper to (paper source). The paper has run out. Add paper to the paper source;
Casset. 1, Casset. 2 (with option paper feeder) or MP
Tray.
The cassette is not properly closed. Be sure the cassette
is closed securely.
page 2-1
Close Document Processor. The document processor is still open even though an
original has been inserted.
Close the document processor.
—
Close Document Processor
Cover.
The left cover to the document processor is open.
Close the cover securely.
—
Close Top Cover. The top cover or the front cover is open.
Close the covers securely.
—
Enter address. Enter was pressed without entering a recipient. Enter the
address.
—
Enter destination. Start was pressed without entering a recipient. Enter the
recipient.
—
Enter file name. Enter was pressed without entering a file name. Enter
the file name.
—
Enter host name. Enter was pressed without entering a host name. Enter
the host name.
—
Enter path. Enter was pressed without entering a PC folder path or
an FTP network path. Enter the PC folder path or FTP
network path.
—
Entry error.
Enter correctly.
An invalid character was entered. —
Error occurred.
Call service person.
C####
Error occurred.
Power switch turn off and on
again.
C####
Turn the power switch off and then back on again. If this
message still remains, make a note of the number that is
displayed together with the letter C. Then, turn the power
switch off, and contact your service representative or
authorized service center.
—
Exceeded max count. Job is
canceled.
When job accounting is enabled and the current job will
exceed the account limit, press right Select to cancel the
print job.
—
Illegal account. Job is
canceled.
When job accounting is enabled and the selected
account is invalid, press right Select to cancel the job.
—
Illegal user ID. Job is
canceled.
When user login is enabled and the wrong user ID or
password is entered, press right Select to cancel the job.
—
2GM_UTAX_ENG_OG.book 3 ページ ２００５年３月４日 金曜日 午後９時４５分

Utax CD 1018 Specifications

General

Brand	Utax
Model	CD 1018
Category	All in One Printer
Language	English