3-28
Basic Operation
Canceling Jobs
Follow the steps below to cancel any print or send job being executed.
Canceling Jobs
You can also cancel jobs by pressing the Stop key.
1 During a printing or sending job, press the Stop key. The
Job Cancel List menu appears.
NOTE: Pressing the Stop key pauses a printing job but
does not pause a sending job.
2 Press the ļ² or ļ³ key to select the type of job you want
to stop, and then press the OK key. An output queue of
the selected job type is displayed.
3 Press the ļ² or ļ³ key to select the job you want to stop,
and then press [Menu] (the Right Select key). Menu
appears.
4 Press the ļ² or ļ³ key to select [Cancel Job] and then
press the OK key. A confirmation screen appears.
5 Press [Yes] (the Right Select key). The screen displays
Canceling.... and returns to the output queue of the
selected job type after the job is canceled.
To cancel other jobs, repeat steps 3 to 5.
To Next Page
Loading...
Need help?
General
