8-116
Default Setting (System Menu)
Adjustment/Maintenance
Adjust printing quality and conduct machine maintenance.
ā¢ Copy Denst. Adj. ā¦8-116
ā¢ Send/Box Density ā¦8-117
ā¢ Backgrnd Density ā¦8-117
ā¢ Print Density ā¦8-118
ā¢ Correct. Bk Line ā¦8-119
ā¢ New Developer...8-120
ā¢ DP Adjustment...8-121
NOTE: If user login administration is enabled, you can only change the settings by logging in with administrator
privileges.
Copy Denst. Adj.
Adjust copy density. Adjustment can be made in 7 levels.
Use the procedure below to adjust the copy density.
1 In the Sys. Menu/Count. menu, press the ļ² or ļ³ key to
select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu appears.
3 Press the ļ² or ļ³ key to select [Copy Denst. Adj.].
4 Press the OK key. Copy Denst. Adj. appears.
5 Press the ļ² or ļ³ key to select the density from
[-3 Lighter] to [+3 Darker].
6 Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
To Next Page
Loading...
Need help?
General
