Val Controls IHP24-F User Manual

DID-UM-002
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600
vc@valcontrols.com • www.valcontrols.com
Revision: 10
68/74
No. 611
Pump control. Max running time
Description
The motor has been running for too long.
Trouble shooting
This error can be caused by:
• Digital output to the motor has been On longer than the Max running
time
It can be solved by:
• Investigate what causes the motor to run. Is it not able to get the
pressure within the limits?
• Increase the Max running time
• Disable the Max running time feature

Val Controls IHP24-F Specifications

General

Brand	Val Controls
Model	IHP24-F
Category	Controller
Language	English