7.
Automatic slip regulation.
• OFF
• 1 = small inuence
• 5 = large inuence
1.
Moving slider bar to the left gives priority to the engine rpm:
Under load, the transmission ratio will automatically adjust to maintain
engine rpm. +Power delivery e.g. in PTO tasks
2.
Moving slider bar to the right, then priority is given to the transmission ratio:
The engine reduces rpm, whilst still maintaining the most economical transmission
ratio. This increases fuel economy e.g. in transport tasks.
Knob can be adjusted on the move, or when stationary. For usual tasks setting
in the middle works best.
Your Valtra tractor has features which allows the transmission
to work the best way possible on every task. When you adjust
transmission settings correctly, you will get lower fuel consumption
and you will get power just to place where it is needed.
HOW TO ADJUST
TRANSMISSION TO WORK BEST WAY
POSSIBLE ON YOUR TASK
TRANSMISSION DROOP - Controls how engine reacts on load.
In Direct tractors there is a traction control system which limits
your wheel slip when driving / working. You can set desired max
wheel slip from transmission setting menu in the armrest screen.
Then tractor takes care that your working is as efcient as
possible in all driving situations without unnecessary wheel slip.
This way you get your work done easier, faster and with lower fuel consumption. Also you get less
soil compaction, when using it on the eld. You can set the required slip from transmission settings.
ASR (Acceleration Slip Regulator)
TRACTION CONTROL
2
1
13
T/N Series Quick Guide / Direct
To Next Page
Loading...
Need help?
General
