Vax DCS2V1MP User Manual

PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Before you begin
For best performance position the appliance a safe distance
away from walls, furniture and clothing with sucient spacing
as shown above, preferably a hallway or landing with the
internal doors open.
Plug the dehumidier into the mains. The appliance will produce a 2
second audio bleep conrming there is power to the appliance. Press
the on/o button on the control panel to switch the appliance on.
The fan will activate and the Led light on the front of the appliance
will illuminate.
Using the mode/programme button select one of the four
programme options.
Adequate ventilation
such as leaving
all internal doors
open, will allow
the dehumidier to
provide best coverage
around the
home.
IMPORTANT: Remove all packaging covering the appliance. Make sure the water tank and lters are in place and
correctly tted. Stand the appliance upright on a stable, at surface away from sources of heat or open windows.
Never block the air grills, keep the air grills free from any obstruction. Never position the dehumidier under
washing to prevent water dripping onto the appliance.
IMPORTANT: Care should always be taken when using a dehumidier in a new build home or if any internal
plaster renovation has been carried out within the last 6 months.
We recommend using the appliance with the humidity dial set to high and gradually adjusted over a period
of weeks to prevent excess over-drying. Vax cannot be held responsible for any building damage as a result
of improper use. Guidance should always be taken from you home builder.
30cm or more
20cm
or more
20cm
or more
20cm
or more
10cm
or more
TIP
Using your machineGetting started
Using the control panel
The LED lights will illuminate over the function names when selected
Timer
1hr delay o increments up until
a maximum of 24hrs.
Tank Full
Indicates tank
is full/removed.
Timer
Indicates time delay
is active.
Clothes Drying Mode
Operates the fan on high speed
and turns on compressor – ignore
users humidity setting so it can
dry clothes within the room The
product will only operate for a
maximum of four hours to prevent
over drying and potential property
damage.
Fan Only Mode
Operates the fan on high speed
– no compressor or extraction.
Ideal for summer / winter
months to help circulate air
in a room.
Night Mode
The user sets their humidity level
for night. The product reduces to
low fan, LED’s power o and the
audio function turns o so not to
disturb the user during the night if
the tank is full.
Only operation and Night Mode LED
will remain lit on the display.
Daily Mode
Allows the user to pre-set the room
humidity level – between 30 – 80%.
Digital display
Displays current humidity,
set humidity and time delay.
Allows user to adjust humidity/
time delay hours.
On/OProgram
Allows one of the
4 programs to be
selected.
On/O Indicator
IMPORTANT: The control panel is touch sensitive, lightly press the
controls. When the machine is activated the digital humidity reading of the
room will be displayed.

Vax DCS2V1MP Specifications

General

Brand	Vax
Model	DCS2V1MP
Category	Dehumidifier
Language	English