Emptying the water tank
With the water tank removed from the
appliance, gently pull one side of the
water tank handle to detach from the
water tank cover.
Pull and remove the other side of the
handle from the cover.
Lift and remove the cover from the
water tank.
Rinse the tank under water and wipe
dry with a clean cloth.
Ret the water tank cover and the
handle to secure cover into place.
IMPORTANT: Do not leave water stored in the water tank between uses.
Always switch the appliance o and unplug from the mains when removing or retting the water tank or lter,
and before carrying out any maintenance or troubleshooting checks.
IMPORTANT: Do not attempt to remove the oat from inside the tank.
When the water tank is full or incorrectly tted, the LED light on the front of the appliance will ash. The appliance
will operate for several minutes and then shut down. The LED light will continue to ash.
Emptying the water tank
Using the release handles pull either
side of the water tank and remove
the water tank from the back of the
appliance.
Carry the water tank carefully by the
handle. The water tank cover is not
detachable.
Empty the water tank over a sink and
rinse tank. Wipe the outside of the tank
with a clean dry cloth and ret tank.
Taking care of your machine Taking care of your machine
To Next Page
Loading...
Need help?
General
