†
†
Registration required. Terms and conditions apply, see vax.co.uk for details.
* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the product before calling.
The plug may not be fully pushed into the electrical socket.
Check the fuse in the plug if this needs replacing, always replace with a 13amp
British fuse.
Timer may have nished, re-set the timer. Go to ‘Using your machine’.
The water tank is full. Go to ‘Taking care of my machine’.
The machine has not been positioned correctly, place the machine on a at, stable,
solid surface. Go to ‘Getting started’.
The drainage hose has not been correctly tted. Go to ‘Using your machine’.
The machine has been moved or tilted with water in the water tank. Remove water
tank and empty. Go to ‘Taking Care of your machine’.
The water tank is full. Go to ‘Taking Care of your machine’.
The water tank is incorrectly tted. Ret the water tank.
SolutionProblem
Why does my
dehumidier
have no power?
Why is water leaking
from my dehumidier?
Why are the LED lights
ashing red on the
control panel?
Getting in touchWhat to do if it goes wrong
To Next Page
Loading...
Need help?
General
