Getting started
6
Assembling your upright
PLEASE READ SAFETY INFORMATION BEFORE USE (PAGE 4 & 5 )
Using a crosshead screwdriver,
remove the screw from the back of
the unit as shown.
Slide the handle down onto the
main body of the unit.
Return the screw and tighten,
securing the handle into the main
body of the unit.
Insert the lower hose to the lower
hose connector.
Place the 2-in-1 tool into the
holder.
Connect the upper hose to the
upper hose connector, rotate hose
clockwise to secure.
To Next Page
Loading...
Need help?
General
