Veeder-Root Series C628 User Manual

5
VEEDER-ROOT
PGM
RST
OP1
OP2
VEEDER-ROOT
PGM
RST
OP1
OP2
VEEDER-ROOT
PGM
RST
OP1
OP2
VEEDER-ROOT
PGM
RST
OP1
OP2
VEEDER-ROOT
PGM
RST
OP1
OP2
VEEDER-ROOT
PGM
RST
OP1
OP2
VEEDER-ROOT
PGM
RST
OP1
OP2
OPERATION
OPERATION MODE
CHANGING A PARAMETER VALUE
* Parameter descriptions will not
appear on the primary display if the
"Help" function has been disabled.
PGM
PGM
PGM
Default display is the rate value.
Pressing the Program Key will cause the
display description to appear on the
main display.* If there is no key activity
for 3 seconds, the primary display will
switch back to the rate value.
Continued pressing of the Program Key
will scroll through the Parameters. (See
Parameter Sequence below.) The full
parameter description will appear on the
main display.*
To change a Parameter value, press the
Scroll Key. If there was no key activity
for 3 seconds, the Preset value will
appear (one digit description shown on
secondary display); however, press the
Scroll Key in order to edit. The unit will
now be in Edit Operation as signified by
the most significant digit flashing.**
Use the Scroll Key to move from left to
right and highlight the digit that needs
to be changed. Wrap around will occur
from the least significant to the most
significant digit.
Use the Down Key to decrement the
digit until the desired value appears.
The display will wrap around from 0 to
9.
After the desired digits have been
changed, press the Program Key to enter
the new value. The new value will
appear on the main display without any
flashing digits. Press the Progam Key
again and the parameter description will
appear on the main display.
23456
Hi AL
rAtE
H
34567
H34567
H
33567
Hi AL
PGM
** Edit Operation cannot be
accessed if the Preset Lock has
been enabled in Program Mode.
PARAMETER SEQUENCE
rAtE
Rate Value
Function: Displays present rate value
Range: 0 to 99999
PGM
Count Value
Function: Displays present count time
Range: 0 to 99999
PGM
Count
C
High Alarm Value
Function: Defines the rate or count value
at or above which Alarm 1 will activate
Adjustment Range: 0 to 99999
Default Value: 1000
PGM
Low Alarm Value
Function: Defines the rate or count value
at or below which Alarm 2 will activate
Adjustment Range: 0 to 99999
Default Value: 10
L
H
r
Hi
AL
Lo AL
www.TheTimerAndCounterCompany.com

Veeder-Root Series C628 Specifications

General

Brand	Veeder-Root
Model	Series C628
Category	Measuring Instruments
Language	English