A-1
Appendix A: Site Survey for Wireless Probes
OBJECTIVE
The objective of the site survey are:-
• To acquire information that will ensure that all the items necessary to complete the installation are ordered and
supplied.
• To establish where the system assemblies will be best located, so that this information can be passed on to the
installation team.
• To establish any site conditions or anomalies that will affect the installation
• Ultimately to ensure the completed installation is of the required high standard
METHOD
A trained person certified by GVR should undertake the site survey: this person will collect the necessary
information and then submit this information in a specified format.
Instructions to Survey Engineer
OBJECTIVE
The Survey engineer needs to provide accurate site information so that when the System is installed and
commissioned it will function reliably, and meet the requirements of the customer.
METHOD
The need for a survey will be triggered by a sales enquiry: The surveyor will require the following basic information:-
• Site name and address.
•Customer
• Telephone number
• Gauge type
• Number of tanks to be gauged
• Additional sensors
• Special instructions
Completion of Site Survey Form
OBJECTIVE
The aim of the survey sheets (or PC software) is to record data collected at the time of the survey to enable
correct equipment specification, identify all works necessary before the installation date, special tools or
equipment required for installation, and site specific data required for a successful commissioning.
To Next Page
Loading...
Need help?
General
