Ruby SuperSystem™ GemStall
VeriFone Confidential 9/4/02
14
Critical information when using GemStall’s backup option:
•
This option is not an entire backup – there will be data files that cannot
be backed up on the diskette. The data files that are backed up are
specific to the software application version.
•
When using the backup option, whatever software application version
you opened in GemStall will be the software application version the
data files will be saved as. For this reason it is strongly recommended
to label the diskette with the software application version.
•
The backup option works in conjunction with the restore option in
GemStall. If you are going to use the restore option you MUST have
opened the same software application version as the backup data files.
•
Before going into GemStall on your computer format the diskette.
To Backup Data Files:
STEP ACTION
1 Format the diskette(s) you will be using for the backup(s).
2 Open the software application version.
3 Use the <RIGHT ARROW> key, highlight Backup, and press
the <ENTER> key. Then follow the GemStall prompts to
backup the data files.
4 Label the diskette(s) with the software application version.
Restore Option
The restore option in GemStall is used to download specific data files on the
Ruby terminal. The restore function is used in conjunction with the backup
function in GemStall.
If you will be completing an upgrade to the current software application in the
Ruby, please refer to the VASC Installation and Service Manual, Software
Upgrade chapter.
To Next Page
Loading...
General