Ruby SuperSystem™ GemStall
VeriFone Confidential 9/4/02
13
Upgrade Option
This option is used to download a specific file or configuration to the Ruby
terminal. The Upgrade option can also be used to download a change to a
specific file or configuration to the Ruby terminal.
NOTE:
This option is NOT used to upgrade the entire software application. If
you need to upgrade the software version please refer to the VASC
Installation and Service Manual, Software Upgrade chapter.
To upgrade a specific file or to change a specific file in the Ruby terminal, use
the following step-by-step process.
STEP ACTION
1 Open the software application.
NOTE:
The software application you open MUST be the same
version software application that is currently in the Ruby
terminal.
2 Use your <RIGHT ARROW> key, highlight Upgrade and press
the <ENTER> key.
3 GemStall will display a window with several options, select the
file or configuration you need to download by using your
<DOWN ARROW> key, and press the <ENTER> key.
4 If necessary select the type of configuration, assign a comport,
and baud rate using your <SPACE> bar and the <ENTER>
key.
Backup Option
This option is used to download specific data files onto a diskette from the
Ruby terminal.
If you will be completing an upgrade to the current software application in the
Ruby, please refer to the VASC Installation and Service Manual, Software
Upgrade chapter.
To Next Page
Loading...
General