Ruby SuperSystem™ GemStall
VeriFone Confidential 9/4/02
2
Requirements
System Requirements
When using GemStall you will be connecting your PC (or laptop) to the Ruby
terminal. The following are the PC (or laptop) requirements needed in order
for the GemStall utility to work properly. These requirements are also needed
in order for you to obtain a connection from your PC (or laptop) to the Ruby
terminal.
Pentium I, 166 mHz processor or better
32 MB of RAM or more
1 gigabyte hard drive or larger
Diskette drive
CD-ROM drive
9-Pin male serial port connection
NOTE: Some computer manufacturers are building laptops without the standard
9-pin male serial port. As a VeriFone Authorized Service Contractor you must
have a 9-pin male serial port connection. This is necessary in order to download
software applications, perform backups and restores, and perform service work
on the Ruby SuperSystem.
Modem, 28.8 kbps or higher
Mouse (external-optional, but much easier to move around)
At least 500 MB of free hard disk space
Hardware Requirements
You will need the following equipment or hardware in order for you to obtain a
connection from your PC (or laptop) to the Ruby terminal.
•
DB9, Null Modem Adapter (Female), VeriFone P/N 13638-01
•
RS232 Cable, VeriFone P/N 13836-01
•
Ruby SuperSystem Terminal
Software Requirements
You will need the following software in order to obtain a connection from your
PC (or laptop) to the Ruby terminal, in addition to downloading and installing
applications to the Ruby terminal.
•
DOS v6.0 or higher
•
GemStall software, v2.11
•
VeriFone Ruby SuperSystem Network/Major Oil Application
To Next Page
Loading...
General