Viotek GNV27DB User Manual

9
Section 6: Basic Operation
1. Insert one end of the DisplayPort (DP) cable into your PC’s graphics card. An
HDMI cable (not included) may also be used. A DP cable is included for your
convenience.
2. Connect the other end of the cable to the corresponding connector on your
monitor.
HDMI Ports
Audio Out
DP Port HDMI 2.0 HDMI 1.4
3. Connect the power cable to your monitor, then connect the other end to your
power source. It is recommended that you use a surge protector with adequate
voltage if a wall outlet cannot be reached directly.
4. Locate the power button on the monitor and press it to turn the monitor on.
AMD FreeSync
This feature is off by default. To activate, you must have a DP or HDMI cable,
and FreeSync-compatible hardware with the latest graphic drivers installed.
After connecting your computer and monitor with a DP or HDMI cable, you may
receive a prompt to enable the feature on your computer. If you do not, you may
need to enable the function in your graphics card menu. See your graphics card
manufacturer’s documentation for instructions.
Section 7: Indicator Light
Indicator Light
Solid blue light indicates power is on and the monitor is operating normally. Flashing
blue light indicates no video source, no horizontal or vertical signal has been
detected or voltage is low. Please ensure your computer is on and all video cables
are fully inserted and/or connected.
GNV27DB.indd 9 2020/3/26 18:39:15

Viotek GNV27DB Specifications

General

Model Number	GNV27DB
LED Indicator	Power on: Blue (solid); Power saving: Blue (flashing)
Screen Size	27’’
Curvature	1500R
Viewing Angle	178°(H) / 178°(V)
Aspect Ratio	16:9
Resolution	2560 x 1440p
Backlight	E-LED
Typical Brightness	250 cd/m2
Default Color Temp.	6500
Color Gamut	96% sRGB; 85% NTSC; DCI-P3 90%; Adobe RGB 83%
Contrast Ratio	3000:1 (Static)
Dot Pitch	0.2331 x 0.2331 mm
Refresh Rate	144Hz
Response Time	6ms (GTG)
Ports	HDMI 2.0 x 1, HDMI 1.4 x 2, DP x 1, Audio out x 1
Power	DC 12V, Min 4A
Power Consumption	Typical: 37W, Max: 58W; Standby <=0.5W
OSD Language	English, Español, Русский, Français, 한국, 日本語, 简体 中文
Usage Temp.	32°F~95°F (operating), -4°F~140°F (storage), 10-90% RH (non-condensing)

Weight and Dimensions

Tilt Angle	Forward 5°+ 2°; Backward 15°+ 2°
VESA Mounting	75 x 75 mm
Dimension (With Stand)	24.26 x 17.84 x 7.7 in (616.2 x 453.1 x 195.7mm)
Weight	10.69 Ib. / 14.82 Ib. (incl. packaging)