10
Section 5: Basic Operations
1. Connect the Type-C power cable to your monitor, then connect the other end to
your power source.
It is recommended to connect the Type-C port to power the device rst.
2. Insert one end of the Type-C cable into your computer or mobile phone with
Type-C jack. An HDMI cable may also be used. A mini-HDMI cable is included.
3. Connect the other end of the cable to the corresponding connector on your
monitor.
Mini-HDMI Port
Type-C Data/Power Port
Type-C Power Port
4. Long-press the power button for ~3 seconds to turn the monitor on.
Power Button
FreeSync
The feature itself is off by default. In order to use this feature, you must have
hardware with FreeSync capability, a Type-C or HDMI cable, and the latest graphic
drivers. To use this feature, connect your compatible device to the LinQ (P16C) with
a Type-C or HDMI cable. After connecting, you may receive a prompt to enable the
feature on your computer. If you do not receive the prompt, you may need to enable
the function in your graphics card menu. See your graphics card manufacturer’s
documentation for instructions on how to turn on and/or enable FreeSync.
To Next Page
Loading...
Need help?
General
