Vision SB-1900P User Manual

12
Mode Selection
- Press the SOURCE button on the main unit or the AUX, HDMI 1, HDMI 2, HDMI ARC buttons on
the remote control to select the desired mode.
- The indicator light on the front of the main unit will show which mode is currently in use..
• Red : STANDBY mode
• Green : AUX mode
• Blue : Bluetooth mode
White : HDMI 1 mode
White flash : HDMI 2 mode
• Orange : HDMI ARCmode
Adjust the Volume
• Press the VOL +/– button to adjust the volume.
• If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE
button again or press the VOL + button to resume normal listening.
Note: While adjusting the volume, the status LED indicator will flash quickly. When the volume has
hit maximum/minimum value level, the status LED indicator will flashes once.
Select equalizer (EQ) effect
While playing, press the EQ button on the unit or the FLAT / MOVIE / MUSIC buttons on the remote
control to select the desired preset equalizers.
AUX / HDMI Operation
1 Ensure that the unit is connected to the TV or audio device.
2 While in ON mode, press the SOURCE button on the main unit or the AUX, HDMI 1, HDMI 2,
HDMI ARC buttons on the remote control to select the desired mode.
3 Operate your audio device directly for playback features.
4 Press the VOL +/– button to adjust the volume to your desired level.
Note: While in HDMI 1 / HDMI 2 / HDMI ARC mode, if there’s no sound output from the unit and the
Status lights flashes quickly, you may need to activate PCM Signal output on your source device (eg.
TV, DVD or Blu-ray player).
Bluetooth Operation
You can listen to tracks from a media device if connected to the unit via Bluetooth.
Pair Bluetooth-enabled Devices
The first time you connect your bluetooth device to this player, you need to pair your device to this player.
Note:
- The operational range between this player and a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.

Vision SB-1900P Specifications

General

Brand	Vision
Model	SB-1900P
Category	Speakers
Language	English