8
Preparations
Prepare the Remote Control
The provided Remote Control allows the unit to be operated from a distance.
•
Even if the Remote Control is operated within the effective range 19.7 feet (6m), remote control
operation may be impossible if there are any obstacles between the unit and the remote control.
•
If the Remote Control is operated near other products which generate infrared rays, or if other
remote control devices using infra-red rays are used near the
unit, it may operate incorrectly. Conversely, the other products
may operate incorrectly.
First-time use:
The unit has a pre-installed lithium CR2025 battery.
Remove the protective tab to activate the remote control battery.
Replace the Remote Control Battery
- The remote control requires a CR2025, 3V Lithium battery.
1. Remove the screw with a screwdriver and then remove the back
cover battery compartment of the remote control.
2. Remove the old battery.
3. Replace with a new battery.
4. Close the battery compartment cover and tighten the screw with
the screwdriver.
Precautions Concerning Batteries
•
When the Remote Control is not to be used for a long time (more
than a month), remove the battery from the Remote Control to
prevent it from leaking.
•
If the batteries leak, wipe away the leakage inside the battery
compartment and replace the batteries with new ones.
•
Do not use any batteries other than those specied.
•
Do not heat or disassemble batteries.
• Never throw them in re or water.
•
Do not carry or store batteries with other metallic objects. Doing
so could cause batteries to short circuit, leak or explode.
•
Never recharge a battery unless it is conrmed to be a rechargeable type.
1
2
4
3
Placement and Mounting
Placement
A B
A If your TV is placed on a table, you can
place the unit on the table directly in
front of the TV stand, centered with
the TV screen.
B If your TV is attached to a wall, you
can mount the unit on the wall
directly below the TV screen.
To Next Page
Loading...
Need help?
General
