ENG VIVAX
11
STAND INSTALLATION
Notes
- The TV screen is very fragile, and must be protected at all times when
removing the base stand. Be sure that no hard or sharp object, or anything
that could scratch or damage the screen, come into contact with it. DO NOT
exert pressure on the front of the TV at any time because the screen could
crack.
- For tabletop use, the TV must be attached to the provided stand as shown on
this page.
- Product images are only for reference, actual product may vary in appearance
WARNING! Be sure to disconnect the AC power cord before
installing a stand or wall-mount brackets.
CAUTION!
Carefully place your TV facedown on a soft,cushioned surface to prevent damage
to the TV or scratching to the screen.
Follow the illustrations and textual instructions below to complete the installation
steps:
1. Attach the stand to the TV set as shown in the picture.
2. Use the screws to fix the stand tightly.
The illustration is for reference only
To Next Page
Loading...
Need help?
General
