VIVAX ENG
12
Wall mount installation
Remove the stand before installing the TV on the wall mount.
If you install the TV on a ceiling or slanted wall, it may fall and result in severe
injury. Use an authorized wall mount and contact the local dealer or qualified
personel.
To prevent injury, TV must be securely attached to the floor/wall in accordance
with the installation instructions.
Note: The wall mount is not contained in the acessories. If you need a wall
mount, please contact your dealer for VESA standard wall mount.
TV Front
Description
1 IR Remote Sensor
Receive remote signals from the remote control.
Do not put anything near the sensor, as its
function may be affected.
2 Remote Indicator
Red light up in standby mode.
NOTES: The Picture is Only for Reference.
Powering on the TV requires several seconds to load program.
Do not rapidly turn the TV off as it may cause the TV to work abnormally.
IRSensor/Indicator
STANDBYLED
To Next Page
Loading...
Need help?
General
