EasyManuals Logo
Home>Volvo Penta>Engine>D1 Series

Volvo Penta D1 Series User Manual

Volvo Penta D1 Series
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Starting
Make a habit of visually checking the engine, engine bay and transmission before start. This will help you to
discover quickly if anything abnormal has occurred, or is about to occur. Also check that instruments and warning
displays show normal values when you have started the engine.
To minimize cold start smoke we recommend you install an engine heater or engine bay heater if temperatures
below +5°C (41°F) are encountered.
WARNING!
Never use start spray or similar agents to start an engine. This may cause an explosion in the inlet manifold. Risk
of personal injury.
Before Starting
Check the engine and transmission oil levels.
Check coolant level.
Open the sea cock.
Open the fuel cock.
Turn the main switch(es) on.
IMPORTANT:
Never disconnect the current using the main
switches when the engine is running or by
disconnecting the battery cables.
The alternator and electronics could be damaged.
Start the engine bay fan, where fitted, and allow it to
run for at least four minutes.
Check that there is sufficient fuel for the planned trip.
32 47711262 01-2019 © AB VOLVO PENTA

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta D1 Series and is the answer not in the manual?

Volvo Penta D1 Series Specifications

General IconGeneral
BrandVolvo Penta
ModelD1 Series
CategoryEngine
LanguageEnglish

Related product manuals