EasyManuals Logo
Home>Volvo Penta>Outboard Motor>D2 Series

Volvo Penta D2 Series User Manual

Volvo Penta D2 Series
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
Lubrication System
Oil change intervals can vary depending on oil grade
and sulphur content of the fuel, please refer to
Technical Data, page 80.
Oil change intervals must never exceed a period of 12
months.
If you want longer oil change intervals than stated in
the table Technical Data, page 80, the condition of
the oil must be checked by the oil manufacturers
through regular oil testing.
Oil level, checking and topping up
The oil level must be within the marked area on the oil
dipstick and must be checked daily before the first
start.
IMPORTANT:
Do not fill up above the maximum oil level. Only use a
recommended grade and quality of oil.
1 Fill oil slowly through the oil filler on top of the
engine (1) or at the side (2).
2 Wait 5 minutes so that the oil has time to run down
into the engine.
3 Check the oil level again when the engine has
cooled.
MIN
MAX
1
2
P0007522
Maintenance
47711262 01-2019 © AB VOLVO PENTA 55

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta D2 Series and is the answer not in the manual?

Volvo Penta D2 Series Specifications

General IconGeneral
BrandVolvo Penta
ModelD2 Series
CategoryOutboard Motor
LanguageEnglish

Related product manuals