EasyManuals Logo
Home>Volvo Penta>Outboard Motor>D2 Series

Volvo Penta D2 Series User Manual

Volvo Penta D2 Series
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
Cooling System
Engine Designation D1-13 D1-20 D1-30 D2-40
Freshwater system volume, approx. 2.7 liters 3.0 liters 4.0 liters 6.4 liters
0.7 US gals 0.8 US gals 1.0 US gal 1.7 US gals
Thermostat
Starts to open at 90±2°C 90±2°C 90±2°C 90±2°C
190-198°F 190-198°F 190-198°F 190-198°F
Fully open at 102°C 102°C 102°C 102°C
215°F 215°F 215°F 215°F
Coolant, Mixing
WARNING!
All coolant is hazardous and harmful to the
environment. Do not consume. Coolant is flammable.
IMPORTANT:
Always use the same type of coolant that is already in
the engine.
Different types of coolant must not be mixed with each
other.
Risk of reduced cooling function and performance by
clogging and isolation.
Coolant shall be based on Organic Acid
Technology (OAT).
Follow the mixing recommendation on the
product.
The coolant should be mixed with distilled, deionized
water. For Volvo Penta specified water requirements;
refer to Water Quality.
NOTICE! Always use “Ready Mixed” coolant if water
quality cannot be determined or if it does not fulfill
ASTM D4985.
NOTICE! Never mix more than 60% concentrated
coolant with water. A greater concentration provides
reduced cooling effect with the risk for overheating and
reduced freeze protection.
Technical Data
82 47711262 01-2019 © AB VOLVO PENTA

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta D2 Series and is the answer not in the manual?

Volvo Penta D2 Series Specifications

General IconGeneral
BrandVolvo Penta
ModelD2 Series
CategoryOutboard Motor
LanguageEnglish

Related product manuals