75
Technical Data
Fuel specification
Fuel must comply with national and international standards at the least, e.g.:
Property Use limit
Flash point ............................................................. As stipulated by regulation
First distillation point .............................................. 170°C (338°F) or more
90% distillation point .............................................. 330 to 380°C (626 to 716°F)
Pour point ............................................................... 6°C (10.8°F) below ambient temperature
Cloud point ............................................................. Below ambient temperature
Carbon residue (10% residue oil)........................... 0.4 weight % or lower
Cetan number ........................................................ 45 or more
Cetan index (new) .................................................. 45 or more
Kinematic viscosity ................................................. 2.0 mm²/S or more [30°C (86°F)]
............................................................................... 8.0 mm²/S or lower [50°C (122°F)]
............................................................................... 10.5 mm²/S or lower [40°C (104°F)]
............................................................................... 16.0 mm²/S or lower [30°C (86°F)]
Sulfur content ......................................................... 0.2 weight % or lower
Water and sediment ............................................... 0.1 volume % or lower
Ash ......................................................................... 0.03 weight % or lower
Copper plate corrosion (100°C)[212°F], 3h ............ No. 3 or lower
Specific gravity (15°C/4°C [59°F/39°F] .................. 0.83 to 0.87
Coking test ............................................................. Not carbonized 100% at 250°C (482°F)
Aromatics content .................................................. 38 weight % or lower
Particulate contaminant.......................................... 5.0 mg/liter or lower
Asphaltene ............................................................. 0.1 weight % or lower
Note! It is necessary to use a fuel that has a pour point suitable for ambient temperature during the operation of
the engine. Consult the supplier to select the right type.
JIS KK 2204. ...................... Type1, Type2, Type3
ASTM, D975 ..................................No.1-D, No.2-D
BS2869 .................................. Class-A1, Class-A2
DIN51601 ............................................. Diesel-Fuel
ISO8217............................................... DMX-Class
Plus d'informations sur : www.dbmoteurs.fr
To Next Page
Loading...
Need help?
General
