21
Regular maintenance
Daily inspection before starting
Check every 14 days
Checking the engine oil level
When checking the level refer to “Technical data” for
the correct type of oil.
CAUTION! Fill to no higher than the “Max” mark. Never
allow the level to fall below the “Min” mark.
Checking the coolant level
WARNING ! Observe extreme caution when
checking the coolant level if the engine is hot
or running - the system is pressurized.
Turn the cap on the expansion tank to the first stop to
relieve the pressure. The level should be between the
maximum and minimum marks when the engine is hot.
It is normal for the level to be lower when the engine is
cold. Fill as required when the engine is running.
WARNING ! Beware of moving pulleys and
drive belts.
Use Volvo Penta type 90 coolant or a 50/50 mixture of
antifreeze and water.
Checking the oil in the reverse gear
Check with the engine stopped. The dipstick (1) should
not be screwed in during measurement. Top up with oil
as required in accordance with “Technical Data”.
To Next Page
Loading...
Need help?
General
