Maintenance: Lubricating system
34
SAE5W/30
−−
−−
−30
−−
−−
−20
−−
−−
−10 ±0 +10 20 30 40
−−
−−
−22
−−
−−
−4
++
++
+14 32 50 68 86 104
−−
−−
−15
o
C
SAE15W/40
−−
−−
−25
o
C
SAE10W/30
−−
−−
−10
o
C
SAE20W/30
±0
o
C
SAE30
SAE40
+10
o
C
o
C
o
F
✱✱
✱✱
✱
ACEA: E3–96, E2–96
API: CD, CE, CF, CF-4, CG-4
Lubricating system
Oil change intervals can vary from 25 to 200 hours, depending on oil grade and sulfur content of the fuel.
Note that oil change intervals must never exceed a period of 12 months.
If you want longer oil change intervals than given in the table below, the condition of the oil must be checked by
the oil manufacturers through regular oil testing.
Oil grade Sulfur content in fuel, by weight
up to 0.5% 0.5–1.0% more than 1.0%
1)
Oil change interval: Reached first in operation:
VDS, VDS-2 200 hr. or 12 months. 100 hr. or 12 months. 50 hr. or 12 months.
100 hr. or 12 months. 50 hr. or 12 months. 25 hr. or 12 months.
NOTE! Mineral based oil, or fully or semi-synthetic oil can be used on condition that it complies with the quality
requirements above.
1)
If the sulfur content in the fuel exceeds 1.0% by weight, an oil with TBN14–20 must be used.
VDS = Volvo Drain Specification
ACEA = Association des Constructeurs Européenne d’Automobiles
API = American Petroleum Institute
TBN = Total Base Number
Viscosity
Select the viscosity from the table below.
Note. The temperature values refer to stable ambient
temperatures.
* Refers to synthetic or semi-synthetic oils.
Oil change volume
Please refer to the “Technical Data” chapter.
To Next Page
Loading...
Need help?
General
