Maintenance
43
Clutch
Lubrication
Use lithium-based grease such as Mobilux EP2,
Statoil Uniway EP2N, Texaco Multifac EP2, Q8 Rem-
brandt EP2.
Main bearing and clutch mechanism
Grease the inner support bearing (where there are
grease fittings), main bearing, declutching shaft and
the clutch mechanism’s moving parts with grease.
Grease sparingly (20–30 grams for the main bearing).
Grease the inner link arms with a few drops of oil.
Declutching bearing
Lubricate sparingly so that no grease squeezes out.
Use grease matching the recommendation above.
Check/adjust
WARNING! Adjustment must be done on a
stopped engine.
Engagement force at the end of the lever should be
36–45 kp during engagement.
Adjustment: Remove the inspection cover. Loosen
the barrier (A) and twist the red adjuster (B) clockwise.
Lock the barrier. The plates must not slip after enga-
gement!
To Next Page
Loading...
Need help?
General
