157
Wheels and tyres
Warning triangle and spare wheel
Spare wheel, tools and jack
1. Jack
1
2. Tool kit
1
with towing eye
3. Mounting
4. Spare wheel
1
The spare wheel and jack and tool kit are
located under the floor of the cargo area.
Remove the spare wheel as follows.
– Remove the rear floor hatch by folding it
up approx. 45° and pulling back. Lock the
front floor hatch in raised position.
– Undo the screws in the plastic trough
(accessory) and lift it out.
– Lift out the jack and tool kit.
– Unscrew the spare wheel and lift it out.
– Return and secure everything in reverse
order. Make sure that the spare wheel is
securely in place and that the jack and
tool kit are properly secured.
Temporary spare
The spare wheel
1
"Temporary Spare" should
only be used for the short time it takes to
repair or replace the normal tyre.
By law, it is only legal to use the spare wheel/
tyre temporarily in connection with damage to
a tyre. A wheel/tyre of this type should be
replaced with a normal wheel/tyre as soon as
possible.
Remember also that this tyre combined with
the normal tyres will affect driving character-
istics. The maximum speed with the
"Temporary Spare" spare wheel is therefore
80 km/h.
NOTE! Only use the car’s own genuine
spare wheel! Tyres with other dimensions
may cause damage to your car. Only one
spare wheel may be used at a time.
1. Certain variants and markets
1
2
3
4
To Next Page
Loading...
Need help?
General
