188
Maintenance and service
Replacing bulbs
Courtesy lighting
There is courtesy lighting under the
dashboard on the driver and passenger
sides.
– Insert a screwdriver and gently turn so
that the lamp housing comes loose.
– Remove the bulb.
– Fit a new bulb.
– Refit the lamp housing.
Vanity mirror, different versions
Vanity mirror lighting
– Insert a screwdriver and turn so that the
lamp lens releases.
– Remove the bulb.
– Fit a new bulb.
– First press the bottom of the lamp glass
back into place above the four hooks.
Then press the top in place.
To Next Page
Loading...
Need help?
General
