42
Instruments and controls
Information display
Messages in the display
A message appears in the display whenever
a warning or indicator symbol illuminates.
Once you have read and understood the
message, press the READ button (A). Read
messages are then erased from the display
and stored in a memory. Messages regarding
faults remain in the memory until the fault has
been remedied.
Very serious fault messages cannot be
erased from the display. They remain in the
display until the fault is remedied.
Messages stored in the memory can be read
again. Press the READ button (A) to see
stored messages. Scroll through the
messages stored in the memory by pressing
the READ button.
Press the READ button to return read
messages to the memory.
NOTE! If a warning message interrupts when
you are in the trip computer menu or wish to
use the phone, you must first acknowledge
the message by pressing the READ
button (A).
To Next Page
Loading...
Need help?
General
