Delay/reverb time
The delay/reverb time is set at the interval at which
the switch is pressed twice.
Press the TIME button. The TIME LED (red) blinks.
Tuner On/Off
Each time it is pressed, the tuner is switched on or
off.
For details, refer to ‘Footswitch function details
(additional info)’ on the next page.
Press and hold the VARIATION button.
The VARIATION LED (red-green – red)
moves smoothly from side to side.
Rhythm variation
Each time it is pressed, the rhythm variation is
switched 1—> 2 → 3 → 1…
Press the VARIATION button.
The VARIATION LED (green) lights up in
the order of 1→ 2 → 3.
Rhythm tempo
The rhythm tempo is set at the interval at which the
switch is pressed twice.
Press the TEMPO button.
The center (green) of the VARIATION
LED blinks.
Rhythm
playback/stop
Each time it is pressed, the rhythm is switched to
playback or stop.
Press the START/STOP button.
During normal operation, the LED turns in
the same way as rhythm playback.
Rhythm mute
On/Off
Each time it is pressed, the rhythm mute is switched
on or off.
Turn the RHYTHM LEVEL knob.
The VARIATION LED (green) blinks
regularly.
Looper recording/
playback/overdub
Each time you press the footswitch, the looper
operation transitions. LOOP mode 1: Record
→ Playback <-> Overdub
LOOP mode 2: Record→ Overdub <–.> Playback
LOOP mode 3: Record → Playback <> Record
For details, refer to ‘Footswitch function details
(additional info)’ on the next page.
Press the LOOP button.
LOOP mode 1 is only available during
normal operation. In Foot Switch Function
Setting mode, each time the LOOP button
is pressed, LOOP mode is switched to 1
→ 2 → 3 (green → orange-red).
To continuously switch LOOP
mode, wait at least half a second before
pressing the LOOP button. If you press
the LOOP button twice within half a
second, looper stop” will be assigned.
LOOP mode 1: The LOOP LED (green)
lights up. LOOP mode 2: The LOOP LED
(orange) lights up. LOOP mode 3: The
LOOP LED (red) lights up.
(TIP] You can assign different modes
to respective switches to make usage
more convenient
Looper stop Press once to stop the looper.
Press the LOOP button quickly twice.
(During normal operation: Performs the
looper stop operation.)
The LOOP LED (green) blinks.
The looper is suspended (with the
phrase) during normal operation.
Looper undo/redo
Each time it is pressed, undo/redo is performed.
If you press and hold the button while suspended,
the recorded phrases will be erased. If you press
and hold the button during playback and
overdubbing has never been performed, the
recorded phrases are erased, and the looper is
stopped.
Press and hold the LOOP button.
(During normal operation: Performs
undo/redo operation.)
The LOOP LED (green) blinks quickly
twice every second.
Looper mute On/Off
Each time it is pressed, the looper mute is switched
on or off.
Turn the LOOP LEVEL knob. The LOOP LED (green) blinks regularly.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
