[TIP] The rhythm tempo is quantized to one beat, two beats, or a well-separated bar length. hi
If the genre is 3/5/7, the rhythm tempo is not quantized to two beats long.
[TIP] The relative position between the beginning of the rhythm and the beginning of the looper is stored, and when simultaneous playback is
performed, the rhythm and looper are played back while the same relative position as Recording mode is maintained (refer to “Simultaneous
playback of rhythm and looper”).
Rhythm playback during looper playback (Automatic tempo adjustment)
If the rhythm is played back during loop playback, the rhythm tempo is automatically set based on the rhythm tempo before playback and the length of the
recorded phrase.
[TIP] Calculate the tempo at which the looper’s phrase length is one beat, two beats, or a well-separated bar length. The number of bars is 1, 2, 4, 8,
12, 16, 24, 32, or 48.
If the genre is 3/5/7, the rhythm is not set to a tempo that is two beats long
[TIP] When the looper is recorded and quantized during rhythm playback, the tempo will not change even if you stop the rhythm and play it back
again.
Simultaneous playback of rhythm and looper
When a looper has already been recorded and both the rhythm and the looper are suspended, if you press both the RHYTHM button and the LOOP button, the
rhythm and looper start playback at the same time. If a looper is recorded during rhythm playback, the rhythm and looper are played back while the same
relative position as the Recording mode is maintained.
[TIP] The looper is always played from the beginning, and the rhythm is played from the middle according to the relative position.
[TIP] The rhythm tempo is automatically adjusted even in the case of the simultaneous playback.
If a looper is recorded while the rhythm is suspended, the relative position is cleared to 0.
If the rhythm tempo is changed, the relative positions of the rhythm and looper are cleared to 0.
Using the Tuner
The tuner function lets you tune a guitar that’s connected to the INPUT jack. The tuner detects the pitch of the input sound, then indicates the discrepancy from
the standard pitch of E
1. Press and hold down the VARIATION button for more than one second.
Effect 1 will be bypassed, and the tuner function will turn on.
2. Play the open 6th string.
Be careful not to touch any other strings.
3. Tune the guitar so that only the center green LED lights up, as shown on the right.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
