15
Parent unit operation
Talk to the baby unit
You can broadcast messages from the parent unit to the
baby unit.
To talk to the baby unit:
Press and hold TALK on the side of the parent unit. Speak
towards the microphone on the parent unit. The screen
displays TALK. Your voice is broadcast to the baby unit.
If the speaker volume of the parent unit is set to OFF, it
will be reset to the default volume after you press and
hold TALK.
Lullaby playback is paused when the parent unit is talking
the baby unit. Lullaby playback resumes when the parent
unit nishes using the TALK feature.
Temperature
The parent unit constantly displays the temperature detected
by the temperature sensor on the baby unit. When the
detected temperature is lower than 14°C, the screen displays
LOW TEMP. When the detected temperature is higher than
37°C, the screen displays HIGH TEMP.
There might be a small difference between the baby monitor
reading and the actual temperature.
•
•
To Next Page
Loading...
Need help?
General
