Telephone operation
37
Make a cell call
Press CELL 1 or CELL 2.
The handset displays Unable to call. Line in use if your cell phone is in use.
Enter the telephone number, then press the corresponding CELL key to dial.
Press on the headset to join the call. Hang up the handset at any time to leave
the call and the headset continues the call.
-OR-
Enter the telephone number, then press CELL 1 or CELL 2.
The handset displays Unable to call. Line in use if your cell phone is in use.
Press on the headset to join the call. Hang up the handset at any time to leave
the call and the headset continues the call.
The handset shows the elapsed time as you talk (in hours, minutes and seconds).
While entering numbers, press DELETE to backspace and delete a digit;
press and hold REDIAL/PAUSE to insert a dialing pause (a p appears).
While using the cell line, place your cell phone closer to the telephone base, and
make sure that there are no physical obstacles such as large furniture or thick
walls between the telephone base and the cell phone.
Answer a cell call
Press /HOME, CELL1, CELL 2, or any dialing key (0-9 or )
to answer.
Press on the headset.
You can also use your cell phone to answer the call. If you answer with your cell
phone, it will disconnect from the telephone base.
End a cell call
Press OFF on the handset or place the handset in the telephone base or
handset charger.
Press on the headset or place the headset in the telephone base.
1.
•
2.
3.
1.
•
2.
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
