31
Getting started
System setup
Prime line
Use this feature, also known as automatic line selection, to choose which line
is automatically selected each time you make an outside call. If you select
Auto, the console selects any available telephone line starting from Line 1.
To set the prime line:
When the console is idle, press MENU
/SELECT.
Press
or to scroll to System Setup, then press
MENU/SELECT or /SKIP.
Press
or to scroll to Prime Line, then press
MENU/SELECT or /SKIP.
Press
or to choose the desired line, then press
MENU/SELECT or /SKIP. To exit without making
changes, press CANCEL.
NOTE: If you install less than four telephone line cords to the
console and select Auto as your Prime line setting, make sure
you plug in your telephone line cords starting from L1/2 jack.
Avoid having any unoccupied telephone jack between other
occupied telephone jacks.
1.
2.
3.
4.
System Setup
Set Ext No.
Remove Ext No.
>Prime Line
Line Group
Network Setup
Network Info
Prime Line
>Line 1
Line 2
Line 3
Line 4
Auto
To Next Page
Loading...
Need help?
General
