35
Getting started
System setup
Network setup (continued)
Press MENU/SELECT to proceed. The screen displays
Subnet mask: XXX.XXX.X.X. Use the dialing keys to
enter a specific subnet mask.
Press DELETE to delete a character.
Press # to add a dot.
Press
/REPEAT or /SKIP to move the cursor to
the left or right.
Press
MENU/SELECT to proceed. The screen displays
Router/Gateway: XXX.XXX.X.XXX. Use the dialing
keys to enter a specific gateway.
Press DELETE to delete a character.
Press # to add a dot.
Press /REPEAT or /SKIP to move the cursor to
the left or right.
Press MENU/SELECT to save. The screen displays IP obtained: XXX.XXX.
X.XXX Check network info? Press MENU/SELECT to read the network info,
or press CANCEL to return to the main menu.
If the IP entered is invalid, the screen displays IP is invalid. briefly and
then returns to the Enter static IP screen.
Reboot the console to update the IP.
6.
•
•
•
7.
•
•
•
8.
•
9.
Subnet mask:
255.255.255.0_
<‘#’ = Add dot>
Router/Gateway:
255.255.255.0_
<‘#’ = Add dot>
To Next Page
Loading...
Need help?
General
