Wacker Neuson E13-01 User Manual

8-2 BA EZ17 en* 1.1 * ez17b800.fm
8 Malfunctions
8.2 Malfunctions of the travelling drive
8.3 Malfunctions of the hydraulic system
Malfunction/sign Possible cause Remedy See
Machine does not stay on track,
machine pulls to the right or left
Wrong track tension Tighten tracks correctly 7-46
Foreign bodies (stones, for
example) stuck in tracks
Remove foreign bodies --
Uneven wear of tracks Contact a service center --
Malfunction/sign Possible cause Remedy See
Hydraulic system overheats
Dirty hydraulic oil radiator
Clean the hydraulic oil radi-
ator
7-36
Hydraulic oil level too low Adding hydraulic oil 7-40
Malfunctioning or insuffi-
ciently tightened V-belt
Contact a service center --
The display element emits a continu-
ous buzzing sound
Malfunctioning pressure
switch of safe load indicator
Stop machine operation
immediately, have the
error repaired by a Wacker
Neuson service center
--
Controls have no function
Control lever base raised
Lower the control lever
base
4-29
Malfunctioning fuse Check the fuse 9-5
Upper carriage cannot be swivelled Upper carriage locked Remove the pin 6-7

Wacker Neuson E13-01 Specifications

General

Brand	Wacker Neuson
Model	E13-01
Category	Excavators
Language	English