5-62 BA E16 en* 1.0 * E16_10_510.fm
5 Operation
5.11 Work operation
Danger zone
• The danger zone is the area in which persons are in danger due to the
movements of the vehicle, attachment or load.
• The danger zone also includes the area that can be affected by falling
material, equipment or by parts that are thrown out.
• The danger zone on a slope is different from the one on a level surface
(secure the load) – see chapter “ Machine travel on slopes” on
page 5-8.
• Stop vehicle operation immediately if persons do not stay clear of the
danger zone.
• Seal off the danger zone should it not be possible to keep a sufficient
safety distance.
• Extend the danger zone sufficiently in the immediate vicinity of
buildings, scaffolds or other elements of construction.
A
Fig. 227 (symbolic representation)
Danger zone with a bucket
Danger zone with a bucket and a safety distance of 1.5 m (59 in)
Danger zone with a grab (for example for picking up a pipe)
Danger zone with a grab and a safety distance of 1.5 m (59 in)
Safety distance of 1.5 m (59 in)
A
A
To Next Page
Loading...
Need help?
General
