5-74 BA E16 en* 1.0 * E16_10_510.fm
5 Operation
5.14 Immobilization/putting back into operation
The specified measures refer to putting the vehicle out of operation and
back into operation after more than 30 days.
Putting out of operation temporarily
Store the vehicle indoors if possible.
If the vehicle has to be stored outdoors, place it on firm ground if possible
(for example on concrete), and cover it with a watertight tarp to protect it
against humidity.
1. Park the vehicle – see "Parking the machine" on page 5-12.
2. Clean the engine with a high-pressure cleaner in a suitable place –
see chapter “7.5 Cleaning and maintenance” on page 7-23.
3. Check the vehicle for leaks and loose nuts, screws and connections.
4. Carefully clean and dry the entire vehicle.
5. Spray an anti-corrosion agent onto bare metal parts of the vehicle
(piston rods of hydraulic cylinders, for example).
6. Apply grease to all lubrication points.
7. Fill the fuel tank completely.
8. Check the hydraulic oil and coolant levels, and add hydraulic oil and
coolant if necessary.
9. Remove the battery and store it in a safe place. Charge the battery and
perform battery maintenance at regular intervals.
10.Set the fuel cock to OFF.
11.Close the air-intake openings of the air filter system and exhaust pipe.
To Next Page
Loading...
Need help?
General
