Maintenance 7
BA TH412 * 06/2017 * 4512_7-1_Hinweise_en.fm
7-1
7 Maintenance
7.1 Information on maintenance
Responsibilities and prerequisites
• The maintenance and inspection personnel must have
specialized knowledge about the maintenance and
inspection work on the machine.
- The necessary expertise can be obtained at training
sessions from Wacker Neuson Service.
• Perform maintenance and inspection work only with
suitable protective equipment.
➥ Wear ear protectors in case of high noise levels.
Safety instructions
Information on maintenance
• Only perform maintenance and inspection work after
having read and understood the Operator’s Manual.
• Pay attention to the basic safety instructions and to all
the warning labels affixed on the machine.
• The Operator’s Manual describes the work to be
performed.
- However, the descriptions of the work processes
provide the required information only to experienced
personnel having appropriate knowledge.
• Always store the Operator’s Manual in the place
provided for it on the machine.
• The work that is not specified in this manual may only
be performed by an authorized service center.
Maintenance