Safety 2
BA TH412 * 06/2017 * 4512_2-1_Sicherheit_en.fm
2-21
2.10 Measures for avoiding risks
Tires
• Have repair work on the tires only performed by
trained technical personnel.
• Check the tires for correct pressure and visible
damage (for example, cracks, cuts).
• Check the wheel nuts for tightness.
• Use only approved tires.
• The machine must have identical tires (for example,
profile, revolutions per mile).
Hydraulic and compressed-air system
• Check all lines, hoses and threaded fittings regularly
for leaks and visible damage.
• Splashed oil can cause injury and fire.
• Leaking hydraulic and compressed-air lines can cause
the full loss of the brake effect.
• Have damage and leaks immediately repaired by an
authorized service center.
• Have hydraulic hoses replaced by an authorized
service center within stipulated intervals even if no
visual defects can be detected.
To Next Page
Loading...
Need help?
General
