3-8
BA TH412 * 06/2017 * 4512_3-1_Einleitung_en.fm
3 Introduction
3.3 Information and regulations on use
Designated use
The machine has been designed and built in accordance
with state-of-the-art standards and the recognized safety
regulations. Nevertheless, its use can pose a danger to
life and limb of the user or of third parties, or cause
damage to the machine and to other material property.
The machine may only be operated in technically perfect
condition in accordance with its designated use and the
instructions set forth in the Operator’s Manual, and only
by persons who are fully aware of the risks involved in
operating the machine. Any malfunctions, especially
those affecting safety, must therefore be rectified
immediately!
The machine is used for picking up and loading material
through a forward motion of the machine, taking into
account the safety instructions/regulations and intervals
specified by Wacker Neuson in the operator’s manual. A
work cycle consists of picking up, raising, transporting and
unloading the material.
Machine applications for similar, related purposes with
other attachments that do not affect the safety
requirements for the machine but change the way in
which it is used are only allowed with the attachments that
have been expressly approved by the manufacturer for
this purpose. Special conditions apply when using
additional attachments from the manufacturer.
Designated use also includes observing the instructions
of the Operator’s Manual, and the maintenance,
inspection and repair conditions.
Any other application of the machine is regarded as not
designated for the use of the machine.
To Next Page
Loading...
Need help?
General
