54
GM 5000EAC.
B_00019
B_03221
M
F
OPERATING MANUAL
EDITION 03/2012 PART NUMBER DOC 2319150
9.3 FILTERS
Part No. Description
3204604 Edge fi lter 60 mesh (white)
3204605 Edge fi lter 100 mesh (black)
9999002 Edge fi lter 200 mesh (yellow)
9.4 REDUCTION FITTINGS FOR HIGH-PRESSURE HOSES
The classifi cation of WAGNER fi ttings is consistent with the following classifi cation, each
separated by high-pressure and low pressure fi ttings.
DF Double fi tting - Male / Male thread
RF Reduction fi tting - Female / Male thread
SF Adjustable screw - Female / Male thread: allows precise angle adjustment (Swivel)
EF 90° elbow - Adjustable or Male / Male thread (Elbow-Fitting)
BF Bulkhead fastener - Male / Male thread with pressure resistant execution
PF Stopper - Male thread to be closed (Plug-Fitting)
HF Hose fi tting with union nut and sealing cone (Hose-Fitting)
The short description of the fi ttings are as follows:
DF- MM- G3/4“- 1/4“NPS- PN270- SSt
Materials, SSt = Stainless steel
Nominal pressure (in bar)
1. Thread, e.g. G1/4“, 1/4“NPS
2. Thread, e.g. G1/4“, 1/4“NPS, M16x1.5
M: Male (external thread) F: Female (internal thread)
Short description see list above, e.g. RF = Reduction Fitting
Part No. Description
384555 Reduction fi tting-RF-FM-M16x1,5-1/4“NPS-PN530-SSt
384559 Reduction fi tting-RF-FM-M16x1,5-G1/4“-PN530-SSt
384556 Reduction fi tting-RF-FM-M16x1,5-3/8“NPSM-PN530-SSt
34041 Reduction fi tting-RF-FM-1/4“NPS-M16x1,5--PN270-SSt
179732 Reduction fi tting-RF-FM-1/4“NPS-3/8“NPS--PN270-SSt
179247 Reduction fi tting-RF-FM-1/4“NPS-G1/4“--PN270-SSt
In the large Wagner Accessories Catalogue for wet coating can also be found other
material screw connections.
To Next Page
Loading...
Need help?
General
