4
OPERATING MANUAL
VERSION 05/2017 ORDER NUMBER DOC 2354920
SPRINT XE
6 COMMISSIONING 29
6.1 Training of Assembly/Commissioning Sta 29
6.2 Storage Conditions 29
6.3 Installation Conditions 29
6.4 Assembling the Manual System 30
6.4.1 Assembling the Equipment Trolley 30
6.4.2 Assembling the Control Unit 30
6.5 Connecting the Manual Powder System 31
6.5.1 Connection Requirements 31
6.5.2 Connecting the Air uid Manual Powder System 32
6.5.3 Connecting the 60 L Tank Manual System 34
6.6 Grounding 36
6.6.1 Grounding the Powder Coating System 36
6.7 Safety Checks 37
7 OPERATION 38
7.1 Training the Operating Sta 38
7.2 Work 38
7.2.1 Switching on the Manual System 39
7.2.2 Adjusting the Fluidization (Air uid) 40
7.2.3 Adjusting Fluidization (60 L Tank Without Vibrator Table) 41
7.3 Factory Setting Recipe Nos. 1–4 42
7.4 Interrupting the Coating Process 43
7.4.1 Air uid Version 43
7.4.2 60 L Tank Version 44
7.5 Performing a Paint Change 45
7.5.1 Air uid Version 45
7.5.2 60 L Tank Version 46
7.6 "Double Click" Recipe (High Dynamic Remote) 49
8 CLEANING AND MAINTENANCE 50
8.1 Cleaning 50
8.1.1 Cleaning Sta 50
8.1.2 Flushing and Cleaning the System 50
8.2 Maintenance 50
8.2.1 Maintenance Sta 50
8.2.2 Maintenance Instructions 50
8.2.3 Safety Checks 51
8.2.4 Maintenance Procedures 51
8.3 Periodic Checking of the Manual System 52
8.3.1 Air uid Version 52
8.3.2 60 L Tank Version 53
9 TROUBLESHOOTING AND RECTIFICATION 54
10 INSPECTIONS 56
11 DISASSEMBLY AND DISPOSAL 57
11.1 Disassembly 57
11.2 Disposal 57
12 ACCESSORIES 58
12.1 Feed System SN-2 550/10 58
12.2 Maintenance Unit 58
12.3 Quick Coupling Set 59
To Next Page
Loading...
Need help?
General
