22
4.5 Timer programming
This function is available for control element of MultiControl.
There is a possibility of programming the time settings 7 days in advance. The
heater switches on automatically at the programmed time. There is a possibility
of saving up to 3 time settings per day and altogether up to 21 time settings.
Depending on the used variant of MultiControl device and application case
(e.g. in a car, in a truck, on the boat, etc.), the number of actively available timers
can fluctuate. There are maximum 21 active timers available.
4.5.1 Creation and activation of timers
3
Time and current day of week are set.
3
The heater is switched off.
3
“Timer” symbol has been selected in the main menu.
Timers
Press the control knob.
“Add timer” message (in no timer has been
saved yet) appears in the display.
Press the control knob in order to add new
timer.
Add timer
Timers
Turn the control knob in order to choose
”Day”.
Press the control knob in order to confirm
selection.
Day
Timers
To Next Page
Loading...
Need help?
General
