52
Turn the control knob in order to choose the
desired “Error information” symbol.
Error
information
Settings
Press the control knob in order to confirm
selection.
Error message (-s) is (are) shown in the display.
If there is no error message then „OK.” appears in
the display. If there are more error messages then
all the messages can be displayed by turning the
control knob.
Settings
Press the control knob in order to return to
submenu.
4.22 Performing reset
As for reset option, all settings are restored to factory settings (standard settings
are configured by a service technician) except a day of a week and an hour.
Note: All personal settings are reset to default values. This procedu-
re cannot be cancelled.
3
“Settings” symbol has been selected in the main menu.
Settings
To Next Page
Loading...
Need help?
General
