13
5.3.1 Remaining operation time of water heater
3
The heater is in the heating mode.
Turn the control knob in order to choose duration of a
minute.
Duration
Heating
Press the control knob in order to confirm selection.
Heating starts functioning. Menu element "Heating" is shown
in the display as well as initially set remaining operation time.
Quick start button shows green light.
5.3.2 Remaining operation time of air heater
3
The heater is in the heating mode.
3
Heater with selectable heating levels:
Press the control knob in order to go from temperature
selection to heating level selection.
Press the control knob in order go from heating level to
remaining operation time selection.
3
Heater without selectable heating levels:
Press the control knob in order to go from temperature
selection to remaining operation time selection.
All heaters:
Turn the control knob in order to adjust remaining operation
time.
By means of turning the control knob in anticlockwise direction
one can shorten remaining operation time.
Press the control knob within 5 seconds in order to confirm
selection.
6 Ventilation mode
The ventilation mode is not supported by all heaters.
Ventilation mode activates only the fan, heating mode is still on. First of all, it enables
cooling of the interior by providing fresh air during air inlet from the outside. There are
four fan speeds available.
They differ in the strength of air flow and in how fast the air exchange takes place.
Fan speed 1 Fan speed 3
To Next Page
Loading...
Need help?
General
