24
3
The menu element "Settings" has been chosen.
Turn the control knob in order to choose menu element
“Day/Night”.
Day/Night
Settings
Press the control knob in order to confirm selection.
“Off” option is preset.
Turn the control knob in order to set the value for the start
of the day, the end of the day, brightness during a day,
brightness at night.
Preset time for a day is shown in the display.
Day/Night
Settings
Press the control knob in order to confirm selection.
An hour for the start of the day flickers in the display.
Turn the control knob in order to choose the desired start of
the day an hour.
Start of
daytime
Settings
Press the control knob in order to confirm selection.
Time of a minute for the start of the day flickers in the display.
Setting the minutes for start of day is done in the
same way as the hours for start of day.
Turn the control knob in order to choose the desired hour
for end of day.
End of daytime
Settings
Press the control knob in order to confirm selection.
Time of a minute for the end of the day flickers in the display.
Setting the minutes for end of day is done in the
same way as the hours for end of day.
“Day” brightness level appears in the display.
Turn the control knob in order to choose the desired bright-
ness level ”day”.
Brightness
(Day)
Settings
Press the control knob in order to confirm selection.
“Night” brightness level appears in the display.
Turn the control knob in order to choose the desired bright-
ness level ”night”.
Brightness
(Night)
Settings
Press the control knob in order to confirm selection.
“Day/night” brightness level appears in the display.
The selected values have been saved.
Day/Night
Settings
To Next Page
Loading...
Need help?
General
