EasyManuals Logo
Home>WEISS>Signal Processors>DSP501

WEISS DSP501 Quick Start Guide

WEISS DSP501
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Weiss Enginering Ltd. DSP501/DSP502
2.8 The Web Interface
As mentioned above you may access the DSP50x via a web browser provided you have connected your
DSP50x with an Ethernet cable to a Router unit. Enter this URL into your browser:
dsp501-nnnn.local (for a DSP501 unit) or dsp502-nnnn.local (for a DSP502 unit)
nnnn is the serial number of your DSP50x unit. You see that number on the back of the unit.
The web interface is described in more detail in the User Manual and White Papers.
2.8.1 Renaming your DSP50x
You may rename your Weiss D/A Converter via the web
interface, specifically to either DSP501 or DSP502. This
is particularly useful in case your device is still subject
to the old naming convention DSP50x and thereby is
not recognized as a Roon Ready Certified device by the
Roon Core.
Click the Rename button in the Device section of the web
interface and select one of the two options DSP501 or
DSP502. Confirm your selection and restart your device
in order for the rename to take effect.
You may repeat this procedure several times.
Figure 12: Pop-up window for renaming your
device via the web interface
2.8.2 Software Updates
In the figure below you see a screen shot of the web interface. At the bottom there is a pad named Check for
Update. If you tap on that the DSP50x checks whether there is any new firmware available to be downloaded.
If this is the case the new firmware is listed and the pad changes to Download Update. If you tap on the pad
the update will be downloaded. This may take some time depending on the speed of your Internet connection.
Once the download has finished, the pad changes to Install Update. Again tap on the pad to install the down-
loaded firmware.
This again takes a minute or two, just wait until the pad changes to Reboot with Update. Again tap on the pad
to start rebooting the DSP50x unit.
2.9 Downloads
Files to download (drivers, manuals) for the DSP50x can be found here:
Downloads
https://www.weiss.ch/download/dsp501-dsp502-processors
Manual
https://www.weiss.ch/files/downloads/dsp501-dsp502-processors/dsp50x-userman.pdf
USB audio class device driver (for Windows)
https://www.weiss.ch/files/downloads/dac501-dac502/WeissEngineering_USBAudio_v5.30.0_202
1-12-08_setup.exe
The first steps with your DSP50x 7 Quick Start Guide

Other manuals for WEISS DSP501

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the WEISS DSP501 and is the answer not in the manual?

WEISS DSP501 Specifications

General IconGeneral
BrandWEISS
ModelDSP501
CategorySignal Processors
LanguageEnglish