Directions for use Maintenance 93
Cleaning instructions and cleaning solutions
Equipment Cleaning instructions Approved cleaning solutions
Monitor
1
1. The equipment can be disinfected to comply with OSHA requirements for cleaning and decontaminating spills of blood
and other body fluids. (Federal OSHA blood borne pathogens standard: 29 CFR 1910.1030, 12/6/91.)
Wipe with a nearly dry cloth moistened with
cleaning solution.
Thoroughly wipe off any excess cleaning
solution. Do not let cleaning solution run into
connector openings or crevices.
2
2. If liquid gets into the connectors, dry the area with warm air and then verify all monitoring functions.
70 % solution isopropyl alcohol;
neutral mild detergent solution;
all products designed for cleaning
plastic.
ECG cable, extension
cable
Consult manufacturer’s instructions. Mild detergent solution; also
consult manufacturer’s
instructions.
SpO
2
cable, extension
cable
Consult manufacturer’s instructions. Consult manufacturer’s
instructions.
Other accessories Consult manufacturer’s instructions. Consult manufacturer’s
instructions.
To Next Page
Loading...
Need help?
General
